Good Quality Epoxy resin AB Glue Epoxy Structural Adhesive for Concrete Stone Granite Brick Crack Repair bonding
|epoxy AB adhesive
|Bonding of granite,concrete,tile,brick,stones
|As Your Design
Place of Origin:China
Certification:SGS ROHS ISO9001
Epoxy adhesive daily output:10000ton
Payment & Shipping
Minimum Order Quantity:400ml/set
Packaging Details:normal export packaging
Delivery Port : Ningbo
Product name:Epoxy ab adhesive
Mix ratio:1:1 by weight
Color:white+black epoxy adhesive
24h hardness(shore D):80-87
Description and advantage
DL-2181 is a moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C.
▪ Easy to mix and apply
▪ Very good adhesion to most construction materials
▪ High strength adhesive
▪ Thixotropic:non-sag invertical and overhead applications
▪ Hardens without shrinkage
▪ Different coloured components(for mixing control)
▪ No primer needed
▪ High initial and ultimate mechanical strength
▪ Good abrasion resistance
▪ Impermeable to liquids and water vapour
Uses As a structural adhesive and mortar for:
* Concrete elements; Hard natural stone; Ceramics, fibercement
* Mortar, Bricks,Masonry; Steel, Iron,Aluminium ; Glass; Wood
As a repair mortar and adhesive:
* Corners andedges
* Holes and voidfilling
* Vertical and overheaduse
Joint filling and crack sealing:
* Jointandcrack arris / edge repair
|Epoxy ab adhesive
|A: black paste B: white pasteMixed: concrete grey
|>10Mpa steel and steel
|24months at 25℃ in original packing a cool, dry and ventilated place
Mortar and concrete must be older than 28days(depends on minimal requirement of strengths).
Verify the substrate strength (concrete,masonry, natural stone).
The substrate surface(all types) must be clean, dry or Mat damp (no standing water) and free from contaminants such as dirt, oil, grease, existing surface treatments and coatings etc.
Steel substrates must be de-rusted similar to Sa 2.5.
The substrate must be sound and all loose particles must be removed
Substrates must be sound, dry or mat damp (no standing water), clean and free from laitance, ice,standing
water, grease, oils, old surface treatments or coatings
and all loose or friable particles must be removed to
achieve a laitance and contaminant free, open textured surface.
Steel: Must be cleaned and prepared thoroughly to an acceptable quality i.e. by blast cleaning and vacuum.
Avoid dew point conditions.
Mix components A+B together for at least 3 minutes with a mixing spindle attached to a slow speed electric drill (max. 300 rpm) until the material becomes smooth in consistency and a uniform grey colour. Avoid aeration while mixing. Then, pour the whole mix into a clean container and stiragain for approx. 1 more Minute at low speed to keep air entrapment at a minimum.Mix only that quantity which can be used with in its pot life.
When using a thin layer adhesive, apply the mixed ad Hesive to the prepared surface with a spatula,trowel, notched trowel,(or with hands protected by gloves). When applying as a repair mortar use some form work. When using for bonding metal profiles onto vertical surfaces,support and press uniformly using propsfor At least 12hours, depending on the thickness applied (not more than 5 mm) and the room temperature. Once hardened check the adhesion by tapping with a hammer.
For information and advice on the safe handling,stor Age and disposal of chemical products, users shall refer to the most recent Safety Data Sheet(SDS) containing physical, ecological,toxicological and other safety-re lated data.